 |
MendelMaxPRO is our product based on the open source project RepRap. In addition to the support that we are giving to our customers, through the RepRap project you may reach valuable information related to the technology, share information with other users and get access to large base of software for 3D design and printing. Significantly improved design over the original MendelMax 1.5 provides better accuracy, higher printing speed and durability.
HIGHLIGHTS
- Redesigned Z-axis home position sensor ❶ allows precise adjustment.
- Threaded rods used to drive the Z-axis replaced by trapezoidal threaded spindles ❷.
 |
- Z-axis threaded rods bearings secured at the top side.
|
|
- Plastic parts are completely redesigned from the original MendelMax 1.5 to increase rigidity. Result is increased accuracy and higher printing speed.
|
SPECIFICATIONS:
|
Technology:
|
Fused Filament Fabrication (FFF) |
|
Build volume:
|
20 x 20 x 16 cm |
|
Layer height:
|
0.1 - 0.4 mm |
|
Heated table:
|
Yes, up to 115 °C |
|
Materials:
|
ABS, PLA, Polystyrene, PET, Nylon, Bendlay, LAYWOO-D3 wood filament, Sandstone LAYBRICK, ... |
|
Filament diameter:
|
3 mm |
|
Nozzle diameter:
|
0.5 mm |
|
Cooling:
|
Active (120 mm controlled fan) |
|
Printer control software:
|
Pronterface |
|
Slicing software:
|
Slic3r |
|
3D model input format:
|
STL |
|
Firmware:
|
Marlin |
|
Printer control language:
|
G-code |
|
Supported OS:
|
Windows (XP or newer), Linux (Ubuntu, Fedora, Debian), MAC OS X (10.7 or newer) |
|
Computer connection:
|
USB |
|
PC requirements:
|
3D design and slicing: multiple core processor, 4GB RAM, 100 GB HDD, 24" monitor
Printer control: laptop having functional battery, USB, Wi-Fi
|
|
Technology:
|
Fused Filament Fabrication (FFF) |
|
Body:
|
Extruded Al profiles |
|
Table:
|
Glass coated with Kapton tape |
|
Positioning resolution:
|
XY: 12.5 microns; Z: 0.6 microns |
|
Axis drive:
|
XY: stepper motor (1.8°, 16 microsteps), timing belt
Z: stepper motor (1.8°, 16 microsteps), threaded spindle)
|
|
Axis bearing:
|
Linear bearings |
|
Speed:
|
XY: 500 m/s positioning, 150 mm/s extruding
Z: 5 mm/s
|
|
Power supply:
|
microATX, 240V AC, 400W |
|
Power consumption:
|
Heated bed: 12V / 15 A max; Extruder: 12V / 2A max
Motor drives: 12V / 6A max.; Maximal power: 267W
Typical: 80W (PLA), 120W (ABS)
|
|
Temperature:
|
Operating: 0 - 30°C; Storage: -20 - +40°C |
|
Humidity:
|
Operating: 0 - 70% non condensing; Storage: 0 - 90% non condensing |
|
Dimensions:
|
57 x 51 x 48 cm (with filament); 57 x 51 x 65 cm (with filament) [ l x w x h ] |
|
Package dimensions:
|
Assembled printer: 63 x 57 x 54 cm
Kit: 63 x 57 x 16 cm:
|
|
Weight:
|
Assembled printer: 15 kg
Kit: 14 kg
|
|
